| Demonstration Experiment on Video Objective: Reaction Rate Peter Keusch |

Hazards and safety precautions:
Safety goggles and protective gloves must be worn. Suitable ventilation! Preparation of the solutions: Solution A: A paste 0.4 g of starch with a few mL of deionized water is made. 500 mL of boiling water are poured onto the paste while stirring. When the solution is cooled down to room temperature 13.7 g of sodium metabisulfite are added. The mixture is poured into a 1000 mL volumetric flask which is made up to the mark with deionized water. Solution B: A 1000 mL volumetric flask containing 3 g of mercury(II) chloride is made up to the mark with deionized water. Solution C: Another 1000 mL volumetric flask containing 15 g of potassium iodate is also made up to the mark with deionized water. Using 3 beakers 150 mL of solution A, 175 mL of solution B and 150 mL of solution C are prepared. Experimental procedure: The three solutions above are poured in alphabetical order A, B, C into a 500 mL conical measure. Results: After about two seconds an opaque orange color precipitate is formed. After further two seconds the mixture turns blue-black.
| ![]()
Discussion: In addition to the reaction steps described under Landolt Reaction - Iodine Clock Reaction a further reaction takes place. Mercury(II) ions react with iodide ions to form an orange color precipitate of mercury(II) iodide, as soon as the iodide ion concentration is large enough ( ion product > solubility product of HgI2 ). Using the concentrations specified above, mercury iodide precipitate does not dissolve. The orange suspension of the HgI2 precipitate is masked by the deep-blue-black iodine-starch-complex when HSO3- ions are consumed up. References: Old Nassau - Haloween Reaction Index of Lecture Experiments |